Home > Fingerprint Control Board >

GROW KS220-L DC30-75V Two Relays Output Fingerprint Control Board With Self-locking/Ignition/Jog Mode With Admin/User

Product Categories

Hangzhou Grow Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

GROW KS220-L DC30-75V Two Relays Output Fingerprint Control Board With Self-locking/Ignition/Jog Mode With Admin/User

Place of Origin : China

Certification : CE

MOQ : 1

Packaging Details : Carton

Delivery Time : Peak Season Lead Time: within 15 workdays Off Season Lead Time: within 15 workdays

Payment Terms : T/T,PayPal

Supply Ability : 5000

Model NO. : KS220-L

Screen : as Picture

Communication Interface : RS232

Fingerprint Capacity : 200 or 120

Power Supply : DC 30-75V

Stand-by Current for Control Board : 3.5mA

Output : Relay

Transport Package : Standard Export Carton Package

Specification : Power supply: DC 30-75V

Trademark : GROW

Origin : China

HS Code : 8471609000

Package Size : 13.00cm * 8.00cm * 9.00cm

Package Gross Weight : 0.100kg

Voice Service : Without Voice Service

Clock : Without Clock

Color : as Picture

Samples : US$ 7/Piece 1 Piece(Min.Order) |

Customization : Available | Customized Request

Shipping Cost : about shipping cost and estimated delivery time.

Payment Method : Initial Payment Full Payment

Currency : US$

Return&refunds : You can apply for a refund up to 30 days after receipt of the products.

Contact Now

KS220-L Technical Parameters
Technical parameter:
·Power supply: DC 30-75V
·Standby current: 3.5mA
·Fingerprint capacity:
·Admin Fingerprint:10 pieces
·User Fingerprint: R503/R502-F:190 pieces R558/R558S:110 pieces
·Output: Relay
·Relay Mode: Self-locking Mode, Ignition Mode, Jog Mode

KS220-L have 2 relays, the power supply is DC30-75V.

Have three relay mode:jog mode, self-locking mode, ignition mode.

Helpful hints:

If need to connect with car,motorcycle, and needs high security product,suggest to chose R503,R502-F.

The difference between KS220-S and KS220-L:

KS220-S: DC12V, 25uA

KS220-L: DC30-75V, 3.5mA

KS220-L Operation Instruction
(In factory working status,the No.1 relay in self-locking mode, the No.2 relay in ignition mode.)
1.Register Administrator Fingerprint: Short press the SET button,the No.4 status indicator shows blue, then press OK button to confirm, now the fingerprint module LED flash,put the same admin finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously and it can register 10 pieces administrator fingerprint; if no need to adding fingerprint more, waiting a few seconds to exit. If the administrator is fully registered,it will be automatically exit the administrator registration state after hear "DiDiDi". It will start register user fingerprint if press SET button again. Admin fingerprint don't have unlocking function, only used for register or delete fingerprint. Admin fingerprint shows purple ring LED, user fingerprint shows blue ring LED.

2.Register User Fingerprint: Press the administrator fingerprint until the module shows blue indicator light and hear the music,means can add user fingerprint. Put the same user finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful.Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.

3.Delete User Fingerprint: Press the administrator fingerprint until the module shows red indicator light and hear "DiDiDi" beep and music,means user fingerprints are deleted.

4.Back to factory default: Short press the SET button again and again,until the NO.4 status indicator shows red, then long press the OK Button until the fingerprint module shows red indicator light flash fast and hear music means initialization operation successful.

5.How to Use Relay 1: Short press registered user fingerprint. Fingerprint module shows green light.

6.How to Use Relay 2: Long press registered user fingerprint. Fingerprint module shows blue light.

Note:
1.Any fingerprint can be used in the factory state, but the function will be invalid after the fingerprint is registered.

Product Files

·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual

You can dowload the KS220-L user manual from this website link:
https://hzgrow.en.made-in-china.com

If need SDK files,pls contact us.

GROW KS220-L DC30-75V Two Relays Output Fingerprint Control Board With Self-locking/Ignition/Jog Mode With Admin/User

GROW KS220-L DC30-75V Two Relays Output Fingerprint Control Board With Self-locking/Ignition/Jog Mode With Admin/User

Product Tags: